Sprinkler Spring Start‑Up in Livonia, MI (Turn On & Tune‑Up)
Get your irrigation system ready for the season with a professional spring start‑up. We safely pressurize the system, test every zone, adjust heads for even coverage, and program your controller for healthy turf and smart water use. Serving Livonia and nearby communities.
Why a Professional Start‑Up Matters
- Prevent damage with controlled pressurization after winter
- Find hidden leaks in valves, manifolds, and lateral lines
- Improve coverage via precise head/nozzle adjustments
- Save water with correct run times, cycles, and seasonal settings
What’s Included in a Spring Start‑Up
Safe Pressurization
- Open main irrigation shut‑off gradually
- Inspect backflow preventer and external piping for leaks
- Set PVB/RPZ/DCVA to operating position
Zone‑by‑Zone Testing
- Run each zone; check pressure and coverage
- Inspect heads, risers, and nozzles for damage or clogs
- Identify line breaks, stuck valves, or wiring faults
Adjust & Optimize
- Align/raise heads; swap nozzles if needed
- Tune rotor arc and distance to reduce overspray
- Test rain sensor and check for leaks after shut‑off
Controller Programming
- Set start times, run times, and days
- Enable seasonal adjust / cycle‑soak as appropriate
- Support for Rachio, Hunter Hydrawise, Rain Bird ESP‑ME3
Helpful Add‑Ons
- Drip flush & filter clean for gardens and beds
- Smart controller upgrade and Wi‑Fi setup
- Valve locating & wire tracing if a zone won’t run
- Nozzle conversions (e.g., MP Rotator for water efficiency)
When to Schedule & Pricing
We start spring turn‑ons in April and continue through May, weather‑dependent. Book early for preferred dates.
Flat‑rate start‑up for most homes. If we discover repairs, we’ll provide an estimate before proceeding.
Serving Livonia & Nearby Cities
We perform spring start‑ups across Livonia (48150, 48152, 48154), plus Westland, Redford, Garden City, Plymouth, Canton, Farmington, Farmington Hills, Northville, Novi, and Dearborn Heights.
Spring Start‑Up — FAQs
Do I need to be home?
Not always. If we have access to the controller and exterior backflow, we can complete the visit. If the shut‑off is inside, someone will need to provide access.
Will you adjust heads and programming?
Yes. Start‑ups include head alignment and controller programming so your system waters efficiently from day one.
What if you find a break or failed valve?
We’ll document the issue and provide clear pricing for repair. With approval, we can often fix it on the spot.
Do you perform backflow testing?
We repair backflow preventers. If a test is required by your city or HOA, we can coordinate a third‑party certified tester after repairs.
How long does a start‑up take?
Most homes take 30–60 minutes depending on system size and adjustments needed.
what else do we offer
Additional Services
We’re committed to providing fast, affordable, reliable, worry-free irrigation and backflow prevention services.
Fixed Price Irrigation
our pricelist
Fixed Rate Irrigation Repair Pricing
For Residential Irrigation jobs, providing a fixed price quotation gives our customers peace of mind and removes the uncertainty of not knowing what the bill will be. It also allows the customer to compare quotes from other Irrigation companies.
- Licensed and Insured
- Prices Include Labor
- Same Day Scheduling
| PVC Line Break | $180.00 |
| Backflow Replacement | $900.00 |
| Sprinkler Head Replacement | $65.00 |
| Smart Timer Upgrade | $450.00-650.00 |
| Wire locating | $125/hour* |
| Water Main Repair | $300-$1,250* |
| Valve Repair | $175-$350* |
| Sprinkler Winterizing | $85.00 |
*Multiple Valve discounts available. Minor line leak discounts available.
FAQ
frequently asked questions
Why are spring startups so important?
Many sprinkler heads get damaged over time from riding lawn mowers, utility workers, vehicles, winter yard work, etc. April is a good time to test your system to make sure that the rotor heads are adjusted properly and the nozzles are clear of debris. Repairs can sometimes be as simple as replacing a filter or spray nozzle that clogged from debris or have come loose over time.
Ask questionAre you licensed?
Yes, we are both a licensed Irrigation Contractor and a Backflow Prevention Assembly Tester. State Law States that 89G-2 no person shall engage in the practice of irrigation construction or irrigation contracting. License # C-965
What exactly is a backflow test
Annual Backflow Testing: Livonia Irrigation are State certified backflow testers that will perform the required annual testing to ensure that your backflow device is operating properly. Livonia Irrigation technicians utilize calibrated testing devices to assure your drinking water is free of any containment in the irrigation lines
From the Start Up to the Closing, Livonia Irrigation has you covered and will be at your service to ensure your lawn sprinkler system is providing the best possible irrigation to your lawn and landscape.
Maintain, Repair, or Replace the Rotors, Nozzles, and Heads
At the beginning of every Spring, your Irrigation System must be properly opened and set up for the coming season. The long winter, freezing temperatures and snow can be extremely harsh on your lawn sprinkler system’s components. A regimented professional spring start up process must be performed to ensure the system is in top working order. It is “NOT” simply – “just turning on the valve”. Livonia Irrigation has proven irrigation solutions to ensure your lawn sprinkler system is operating at its best.
Livonia Irrigation Checklist is what separates the DIY guy, the handyman, and the landscaper from the professionally trained irrigation technician. Livonia Irrigation will perform the following:
1. Reseal all plugs and drain valves
2. Slowly open the supply valves and pressurize supply lines and water mains
3. Perform a complete visual inspection of the main lines, backflow devices, and valve manifolds
4. Re-energize the power to the control timer, booster pumps or well systems
5. Energize each individual zone and perform a detailed inspection of the lateral supply lines. Check sprinkler heads, risers, drip irrigation lines or emitters for proper operation and direction. Each area is reviewed for proper coverage and the correct performance pressure. Any alteration, modification or repairs needed will be noted. Several common repairs/adjustments are:
i. Garden irrigation sprinklers may need to be raised due to shrub or flower growth
ii. Pop up sprinkler heads many need to be relocated due to shrub or flower growth, landscape changes, fence or tree installations
iii. Replace any clogged nozzles
iv. Repair leaks in sprinkler lines
v. Adjust sprinkler heads for direction and volume required for the specific area they are watering
6. Other inspections and adjustments to automatic rain sensors, electronic control valves, control wiring and any isolation shut off valves shall be performed where applicable
7. All additional repairs or proposed alterations will be discussed and a quote will be provided. Depending upon the extent of the work it will be completed at this visit or rescheduled if additional time is required
8 The system will be rechecked once the repairs or alterations are completed. The system is now ready for the Spring season
9. Annual Backflow Testing : Livonia Irrigation are State certified backflow testers that will perform the required annual testing to ensure that your backflow device is operating properly. Livonia Irrigation technicians utilize calibrated testing devices to assure your drinking water is free of any containment in the irrigation lines
From the Start Up to the Closing, Livonia Irrigation has you covered and will be at your service to ensure your lawn sprinkler system is providing the best possible irrigation to your lawn and landscape